Snowflake Mandala Diamond Edge Trinket Stand
$27.00
1 in stock
Snowflake Mandala Diamond Edge Trinket Stand
This Diamond Edge Trinket Stand is a perfect Home Décor Accent Piece. Use it to display your Crystals and Jewelry, or to artistically decorate your space.
This unique, handmade Trinket Stand was made with Jewelry Grade Resin, and has an embedded Snowflake Mandala print on the top. This Trinket Stand has three rows of Diamond Edges on the side, and six feet on the bottom. The top has a glossy finish, and the sides have a textured, semi-gloss finish.
We’ve included a video above, for a more detailed view.
Color: Blue/Purple/Multi
Measurements: approx. 3.86” W x 1.08” H
Weight: 5.23 ounces
If you want to create your own Diamond Edge Trinket Stand, this piece was made with our Diamond Edge Trinket Stand Mold.
NOTE: Because our products are handmade, and resin is not a perfect medium, finished pieces might have slight imperfections (bubbles, small holes, bumps, indents, etc.) If they exist, none of them will detract from the look or effectiveness of the product.
Purchase with confidence: You will receive the exact Diamond Edge Trinket Stand shown here.
Crystal Size Comparison Chart
Dust/Sand: Not measurable
Triple Zero (000): Under 1 mm
Double Zero (00): 1 to 3 mm
Zero (0): 3 to 5 mm
S1: 4 to 6 mm
L1: 5 to 7 mm
Size 2: 6 to 10 mm
Extra Small: 8 to 15 mm
Small: 12 to 20 mm
Medium: 18 to 25 mm
Large: 20 to 30 mm
XL: 30 to 50 mm
NOTE: Color, size, and shape will vary due to the fact that these are natural stones. Also, colors may vary, depending on your monitor settings, and may differ from the actual color of the item.
• Never use a torch or open flame with Silicone Molds.
• Never use anything sharp or abrasive, inside the mold.
• Always use high quality Epoxy Resin products and follow the mixing and pouring directions for that product.
• Keep your mold clean - Keep dust away by storing it in a plastic bag, and only use tape or warm water to clean it.
• The glossy surface of molds will fade away with repeated use. When this happens you will have to topcoat your finished piece, or purchase a new mold.
