






Green and Gold Crystal Edge Vanity Tray
$52.00
1 in stock
Green and Gold Crystal Edge Vanity Tray
This handmade Vanity Tray is a perfect Home Décor Accent Piece. Use it to artistically organize your desk, showcase your Perfumes or Scented Candles, or display your Crystals and Jewelry.
This one-of-a-kind Crystal Edge Vanity Tray was made with highly pigmented Resin Ink, Holographic Glitter, and rich Mica Powders, in Jewelry Grade Resin. This Vanity Tray sits on four Antique Bronze feet and features Crystal formations on the top.
We’ve included a video above, for a more detailed view.
The items shown in the photos and in the video are there for demonstration purposes only. They are not included.
Color: Green/Gold
Measurements: approx. 9.75” L x 5.75” W x 1.17” H
Weight: 1 pounds, 2.3 ounces
NOTE: Because our products are handmade, and resin is not a perfect medium, finished pieces might have slight imperfections (bubbles, small holes, bumps, indents, etc.) If they exist, none of them will detract from the look or effectiveness of the product.
Purchase with confidence: You will receive the exact Crystal Edge Vanity Tray shown here.
Crystal Size Comparison Chart
Dust/Sand: Not measurable
Triple Zero (000): Under 1 mm
Double Zero (00): 1 to 3 mm
Zero (0): 3 to 5 mm
S1: 4 to 6 mm
L1: 5 to 7 mm
Size 2: 6 to 10 mm
Extra Small: 8 to 15 mm
Small: 12 to 20 mm
Medium: 18 to 25 mm
Large: 20 to 30 mm
XL: 30 to 50 mm
NOTE: Color, size, and shape will vary due to the fact that these are natural stones. Also, colors may vary, depending on your monitor settings, and may differ from the actual color of the item.
• Never use a torch or open flame with Silicone Molds.
• Never use anything sharp or abrasive, inside the mold.
• Always use high quality Epoxy Resin products and follow the mixing and pouring directions for that product.
• Keep your mold clean - Keep dust away by storing it in a plastic bag, and only use tape or warm water to clean it.
• The glossy surface of molds will fade away with repeated use. When this happens you will have to topcoat your finished piece, or purchase a new mold.