Geode Agate Tray 2-Part Silicone Mold

Geode Agate Tray 2-Part Silicone Mold

This listing is for one handmade Geode Agate Tray 2-Part Silicone Mold that you can use for Epoxy Resin casting.**

A finished piece from this mold will measure 8 inches wide.

We’ve included a video above, for a more detailed view of the Mold (Video shows after images.)

This is a 2-Part Silicone Mold, made for top-up pours, that consists of a round, flat base, and a removable “river” insert. The bottom of the mold has a textured finish. To work with this mold, you pour resin into the main pockets first, and when that resin has cured, you remove the river insert part of the mold, and then fill the river area with resin. There is also room inside the mold to add a top coat, once the river area has cured.

This Mold uses approximately 15.50 ounces of resin, if you add a top coat. (approx. 6.5 ounces for pocket areas, + 2 ounces for the river, + 7 ounces for a top coat.)

NOTE: The finished resin pieces are shown as samples of what can be created using this mold, and they are not included.

We have uploaded several Video Tutorials, showing how to use this Geode Agate Tray 2-Part Silicone Mold, on our YouTube Channel. Check out the links below to watch them.

Mold Features:

• Made from Platinum Cure Food Grade Silicone
• Made for Top-up pours
• Removable river insert

Color: Translucent White Base and Yellow River Insert

Approximate Measurements:

Mold Base: 8.25” W x .72” H
River Insert: 8” W x .28” H

Makes a finished piece that is 8″ W x .85 to .95″ H.

IMPORTANT NOTES:

• This mold is handmade to order. Please allow 5 business days for production.

• Because this is a handmade mold, it might have small imperfections.

• Click the tab above to read our Silicone Mold Care Guide.

** While Silicone Molds can sometimes be used with other casting materials, we have only used these with high quality Epoxy Resin.