Decorative Raised Display Stand for Resin Art
Decorative Raised Display Stand for Resin Art
Decorative Raised Display Stand for Resin Art
Decorative Raised Display Stand for Resin Art
Decorative Raised Display Stand for Resin Art
Decorative Raised Display Stand for Resin Art
Decorative Raised Display Stand for Resin Art
Decorative Raised Display Stand for Resin Art
Decorative Raised Display Stand for Resin Art
Decorative Raised Display Stand for Resin Art
Pink and Blue Sparkle Ring Cones
Pink and Blue Sparkle Ring Cones Price range: $17.00 through $19.00
Back to products
Tidal Pools Geode Agate Vanity Tray
Tidal Pools Geode Agate Vanity Tray $62.00

Decorative Raised Display Stand for Resin Art

$8.00

Compare
Add to wishlist
SKU: cra10272404 Category: Tags: , , , ,
Description

Decorative Raised Display Stand for Resin Art

We designed these raised Display Stands to showcase finished Resin Art created from our Crystal Edge Molds. These Decorative Raised Display Stands are 3D printed using PLA, and are available in your choice of Black, Bronze, or Purple, with a textured finish.

The decorative feet on these Display Stands are raised to accommodate for the Crystal Edges of Resin Art made from our Crystal Edge A, B, C, and Square Molds (see samples above.) These Display Stands will also work with our Geode Edge Molds G1, G2, G3, and G4. Our Display Stands can also be used with Resin Art created from other molds, or to display Crystal Agates, or Geode Art (be sure to measure for fit.)

Available Colors: Black, Bronze, Purple SOLD OUT

Display Stand Measurement: approx. 3.70” W x 3.50” H x 3.80” D

NOTE: Can hold finished pieces that are 7″ L x .50″ D

Crystal Size Info
The Crystal Chips we sell in our Resin Art Supplies, are not calibrated. Crystal Chips are what remains after the tumbling process of larger, rough stones. The size/measurement of these Crystal Chips is approximate, and falls within a size range. Since orders are filled using random scoops, you will receive larger and smaller Crystals, than the stated measurements. These Crystals are intended for crafting purposes, and we don't guarantee that you will receive any specific Crystal size, for use with any other purpose. The amount of Crystals included will vary based on size and weight.

Crystal Size Comparison Chart

Dust/Sand: Not measurable
Triple Zero (000): Under 1 mm
Double Zero (00): 1 to 3 mm
Zero (0): 3 to 5 mm
S1: 4 to 6 mm
L1: 5 to 7 mm
Size 2: 6 to 10 mm
Extra Small: 8 to 15 mm
Small: 12 to 20 mm
Medium: 18 to 25 mm
Large: 20 to 30 mm
XL: 30 to 50 mm

NOTE: Color, size, and shape will vary due to the fact that these are natural stones. Also, colors may vary, depending on your monitor settings, and may differ from the actual color of the item.
Silicone Mold Care Guide
Helpful tips for working with Silicone Molds

• Never use a torch or open flame with Silicone Molds.
• Never use anything sharp or abrasive, inside the mold.
• Always use high quality Epoxy Resin products and follow the mixing and pouring directions for that product.
• Keep your mold clean - Keep dust away by storing it in a plastic bag, and only use tape or warm water to clean it.
• The glossy surface of molds will fade away with repeated use. When this happens you will have to topcoat your finished piece, or purchase a new mold.