Blue Tiger Eye Crystal Chips – Size XS
$7.50
15 in stock
Description
Blue Tiger Eye Crystal Chips – Size XS
This listing is for 2 ounces of tumbled Blue Tiger Eye stones in Size XS.
Color: Blue/Multi
Measurements: approx. 8 – 15 mm, although some stones measure up to 1″.
Crystal Size Info
The Crystal Chips we sell in our Resin Art Supplies, are not calibrated. Crystal Chips are what remains after the tumbling process of larger, rough stones. The size/measurement of these Crystal Chips is approximate, and falls within a size range. Since orders are filled using random scoops, you will receive larger and smaller Crystals, than the stated measurements. These Crystals are intended for crafting purposes, and we don't guarantee that you will receive any specific Crystal size, for use with any other purpose. The amount of Crystals included will vary based on size and weight.
Crystal Size Comparison Chart
Dust/Sand: Not measurable
Triple Zero (000): Under 1 mm
Double Zero (00): 1 to 3 mm
Zero (0): 3 to 5 mm
S1: 4 to 6 mm
L1: 5 to 7 mm
Size 2: 6 to 10 mm
Extra Small: 8 to 15 mm
Small: 12 to 20 mm
Medium: 18 to 25 mm
Large: 20 to 30 mm
XL: 30 to 50 mm
NOTE: Color, size, and shape will vary due to the fact that these are natural stones. Also, colors may vary, depending on your monitor settings, and may differ from the actual color of the item.
Crystal Size Comparison Chart
Dust/Sand: Not measurable
Triple Zero (000): Under 1 mm
Double Zero (00): 1 to 3 mm
Zero (0): 3 to 5 mm
S1: 4 to 6 mm
L1: 5 to 7 mm
Size 2: 6 to 10 mm
Extra Small: 8 to 15 mm
Small: 12 to 20 mm
Medium: 18 to 25 mm
Large: 20 to 30 mm
XL: 30 to 50 mm
NOTE: Color, size, and shape will vary due to the fact that these are natural stones. Also, colors may vary, depending on your monitor settings, and may differ from the actual color of the item.
Silicone Mold Care Guide
Helpful tips for working with Silicone Molds
• Never use a torch or open flame with Silicone Molds.
• Never use anything sharp or abrasive, inside the mold.
• Always use high quality Epoxy Resin products and follow the mixing and pouring directions for that product.
• Keep your mold clean - Keep dust away by storing it in a plastic bag, and only use tape or warm water to clean it.
• The glossy surface of molds will fade away with repeated use. When this happens you will have to topcoat your finished piece, or purchase a new mold.
• Never use a torch or open flame with Silicone Molds.
• Never use anything sharp or abrasive, inside the mold.
• Always use high quality Epoxy Resin products and follow the mixing and pouring directions for that product.
• Keep your mold clean - Keep dust away by storing it in a plastic bag, and only use tape or warm water to clean it.
• The glossy surface of molds will fade away with repeated use. When this happens you will have to topcoat your finished piece, or purchase a new mold.
