8 inch Glossy Flower Border Tray Mold
$28.00
4 in stock
8 inch Glossy Flower Border Tray Mold
This listing is for one handmade Glossy Flower Border Tray Mold that you can use for Epoxy Resin casting.** This Mold has a unique inset border area where you can add Glitter, Glass, or Mica Powders, to frame the center section, after your piece has cured.
The center of this Mold has a glossy surface, while the outer border and sides have a textured, matte finish.
We’ve included a video above, for a more detailed view of the Mold (Video shows after images.)
NOTE: The finished resin pieces are shown as samples of what can be created using this mold, and they are not included.
We have uploaded several Video Tutorials, showing how to use this 8 inch Glossy Flower Border Tray Mold, on our YouTube Channel. Check out the links below to watch them.
Mold Features:
• Made from Platinum Cure Food Grade Silicone
• Flower Shape with glossy center
• Textured, matte surfaces on outer border and sides
• Unique border area where you can add Glass, Glitter, Mica, etc.
• A fully filled mold will hold approx. 15 ounces of Resin
Color: Translucent White
Mold Measurements: approx. 8.75” W x .97” H (On a fully poured piece the measurements would be approx. 8.25” W x 66” H, with the center glossy area measuring approx. 6.5” W.)
IMPORTANT NOTES:
• This mold is handmade to order. Please allow 5 business days for production.
• Because this is a handmade mold, it might have small imperfections.
• Click the tab above to read our Silicone Mold Care Guide.
** While Silicone Molds can be used with other casting materials, we have only used these with high quality Epoxy Resin.
Crystal Size Comparison Chart
Dust/Sand: Not measurable
Triple Zero (000): Under 1 mm
Double Zero (00): 1 to 3 mm
Zero (0): 3 to 5 mm
S1: 4 to 6 mm
L1: 5 to 7 mm
Size 2: 6 to 10 mm
Extra Small: 8 to 15 mm
Small: 12 to 20 mm
Medium: 18 to 25 mm
Large: 20 to 30 mm
XL: 30 to 50 mm
NOTE: Color, size, and shape will vary due to the fact that these are natural stones. Also, colors may vary, depending on your monitor settings, and may differ from the actual color of the item.
• Never use a torch or open flame with Silicone Molds.
• Never use anything sharp or abrasive, inside the mold.
• Always use high quality Epoxy Resin products and follow the mixing and pouring directions for that product.
• Keep your mold clean - Keep dust away by storing it in a plastic bag, and only use tape or warm water to clean it.
• The glossy surface of molds will fade away with repeated use. When this happens you will have to topcoat your finished piece, or purchase a new mold.
