12 Chakra Crystal Chips Set

Description

12 Chakra Crystal Chips Set

This listing is for a 12 Chakra Crystal Chips Set in your choice of 6 ounces, or 12 ounces.

The 6 ounce choice includes a half ounce of each of the 12 Chakra Crystals.

The 12 ounce choice will give you one ounce of each of the 12 Chakra Crystals.

You can incorporate these Crystals into your Resin and/or Orgonite projects.

Here is a list of the 12 Chakras that the Crystals resonate with:

• Clear Quartz – Higher Crown (2)
• Labradorite – Higher Crown (1)
• Amethyst – Crown
• Sodalite – Brow (Third Eye)
• Blue Lace Agate – Throat
• Rose Quartz – Higher Heart
• Aventurine – Heart
• Gold Tiger Eye – Solar Plexus
• Carnelian – Sacral
• Red Jasper – Root
• Smoky Quartz – Earth
• Bloodstone – Higher Earth

Color: Multi

Measurements: approx. 5- 10 mm.

Crystal Size Info

The Crystal Chips we sell in our Resin Art Supplies, are not calibrated. Crystal Chips are what remains after the tumbling process of larger, rough stones. The size/measurement of these Crystal Chips is approximate, and falls within a size range. Since orders are filled using random scoops, you will receive larger and smaller Crystals, than the stated measurements. These Crystals are intended for crafting purposes, and we don't guarantee that you will receive any specific Crystal size, for use with any other purpose. The amount of Crystals included will vary based on size and weight.

Crystal Size Comparison Chart

Dust/Sand: Not measurable
Triple Zero (000): Under 1 mm
Double Zero (00): 1 to 3 mm
Zero (0): 3 to 5 mm
S1: 4 to 6 mm
L1: 5 to 7 mm
Size 2: 6 to 10 mm
Extra Small: 8 to 15 mm
Small: 12 to 20 mm
Medium: 18 to 25 mm
Large: 20 to 30 mm
XL: 30 to 50 mm

NOTE: Color, size, and shape will vary due to the fact that these are natural stones. Also, colors may vary, depending on your monitor settings, and may differ from the actual color of the item.

Silicone Mold Care Guide

Helpful tips for working with Silicone Molds

• Never use a torch or open flame with Silicone Molds.
• Never use anything sharp or abrasive, inside the mold.
• Always use high quality Epoxy Resin products and follow the mixing and pouring directions for that product.
• Keep your mold clean - Keep dust away by storing it in a plastic bag, and only use tape or warm water to clean it.
• The glossy surface of molds will fade away with repeated use. When this happens you will have to topcoat your finished piece, or purchase a new mold.