Stone Edge Vanity Tray Mold
$63.00
10 in stock
Stone Edge Vanity Tray Mold
This listing is for one handmade Stone Edge Vanity Tray Mold that you can use for Epoxy Resin casting.**
We’ve included a video above, for a more detailed view of the Mold (Video shows after images.)
How to work with this Mold:
#1 – You fill the base and sides of the Tray Mold first, which takes approximately 20 ounces of resin. Once that has cured, you demold and then proceed with a “top up” resin pour of your choice.
#2 – You can fill the Tray with dried Flowers, Crystals, embed keepsakes, use Mica Powders, or use our Lotus Blossom Insert with Corner Accents like we have, in our sample Tray shown above.
#3 – If you want to add additional detail, the cracks on the sides of the completed Tray can be finished easily with Acrylic Paint or Acrylic Paint Pens.
NOTE: The finished resin pieces are shown as samples of what can be created using this mold, and they are not included.
We have several Video Tutorials, showing how to use this Stone Edge Vanity Tray Mold, on our YouTube Channel. Check out the links below to watch them.
Mold Features:
• Made from Platinum Cure Food Grade Silicone
• Created for “Top Up” resin pours
• Unique, matte Stone Edges with random cracks
• Stone Edge forms a rim on top of finished piece so items can’t roll off
• Deeper than regular molds
• A fully filled mold will hold approx. 35 ounces of resin
Color: Translucent White
Mold Measurements: approx. 13.25” L x 8.25” W x .95” H (On a fully poured piece the measurements would be approx. 12.5” L x 7.375” W x .85” H, with the center area measuring approx. 10.75” L x 5.75” W.)
IMPORTANT NOTES:
• This mold is handmade to order. Please allow 5 business days for production.
• Because this is a handmade mold, it might have small imperfections.
• Click the tab above to read our Silicone Mold Care Guide.
** While Silicone Molds can be used with other casting materials, we have only used these with high quality Epoxy Resin.
Crystal Size Comparison Chart
Dust/Sand: Not measurable
Triple Zero (000): Under 1 mm
Double Zero (00): 1 to 3 mm
Zero (0): 3 to 5 mm
S1: 4 to 6 mm
L1: 5 to 7 mm
Size 2: 6 to 10 mm
Extra Small: 8 to 15 mm
Small: 12 to 20 mm
Medium: 18 to 25 mm
Large: 20 to 30 mm
XL: 30 to 50 mm
NOTE: Color, size, and shape will vary due to the fact that these are natural stones. Also, colors may vary, depending on your monitor settings, and may differ from the actual color of the item.
• Never use a torch or open flame with Silicone Molds.
• Never use anything sharp or abrasive, inside the mold.
• Always use high quality Epoxy Resin products and follow the mixing and pouring directions for that product.
• Keep your mold clean - Keep dust away by storing it in a plastic bag, and only use tape or warm water to clean it.
• The glossy surface of molds will fade away with repeated use. When this happens you will have to topcoat your finished piece, or purchase a new mold.
