Crystal Edge Vanity Tray Mold
$52.00
9 in stock
Crystal Edge Vanity Tray Mold
If you want your Resin Art to stand out from the crowd, you need to own this Crystal Edge Vanity Tray Mold.
This Rectangular Tray Mold has shiny Crystal formations along the top and sides, that create a sparkling frame around the glossy center. This Mold holds up to 20 ounces of Epoxy Resin.
This handmade Crystal Edge Vanity Tray Mold can be used for Epoxy Resin casting.**
We’ve included a video above, for a more detailed view of the Mold (Video shows after images.)
NOTE: The finished resin pieces are shown as samples of what can be created using this mold, and they are not included.
We have uploaded several Video Tutorials, showing how to use this Mold, on our YouTube Channel. Check out the links below to watch them.
Mold Features:
• Made from Platinum Cure Food Grade Silicone
• Glossy surface on top and sides of finished piece
• Natural Crystal formations on sides of mold provides 360 degrees of sparkling, sloping edges
• Can be used to create 3D Flower Blooms as well as the Dragon Scale or Crackle Effect Resin Art
• Deeper than regular molds
• A fully filled mold will hold approx. 20 ounces of resin
Color: Translucent White
Mold Measurements: approx. 10.75” L x 7.75” W x .80” H (On a finished piece, the shiny center measures approx. 8.375” L x 5.375” W. On a fully poured piece the bottom base would measure approx. 10.25” L x 7.25” W x .50” H)
IMPORTANT NOTES:
• This mold is handmade to order. Please allow 5 business days for production.
• Because this is a handmade mold, it might have small imperfections.
• Click the tab above to read our Silicone Mold Care Guide.
** While Silicone Molds can be used with other casting materials, we have only used these with high quality Epoxy Resin.
Crystal Size Comparison Chart
Dust/Sand: Not measurable
Triple Zero (000): Under 1 mm
Double Zero (00): 1 to 3 mm
Zero (0): 3 to 5 mm
S1: 4 to 6 mm
L1: 5 to 7 mm
Size 2: 6 to 10 mm
Extra Small: 8 to 15 mm
Small: 12 to 20 mm
Medium: 18 to 25 mm
Large: 20 to 30 mm
XL: 30 to 50 mm
NOTE: Color, size, and shape will vary due to the fact that these are natural stones. Also, colors may vary, depending on your monitor settings, and may differ from the actual color of the item.
• Never use a torch or open flame with Silicone Molds.
• Never use anything sharp or abrasive, inside the mold.
• Always use high quality Epoxy Resin products and follow the mixing and pouring directions for that product.
• Keep your mold clean - Keep dust away by storing it in a plastic bag, and only use tape or warm water to clean it.
• The glossy surface of molds will fade away with repeated use. When this happens you will have to topcoat your finished piece, or purchase a new mold.
