Seed of Life Stone Edge Mold
$28.00
15 in stock
Seed of Life Stone Edge Mold
Create your own unique Crystal Grids with our Seed of Life Stone Edge Mold.
This listing is for one handmade Seed of Life Stone Edge Mold that you can use for Epoxy Resin casting.**
We’ve included a video above, for a more detailed view of the Mold (Video shows after images.)
NOTE: The finished resin piece is shown as a sample of what can be created using this mold, and it is not included.
We have uploaded a Video Tutorial, showing how to use this Seed of Life Stone Edge Mold, on our YouTube Channel. Check out the link below to watch it.
Mold Features:
• Made from Platinum Cure Food Grade Silicone
• Seed of Life Symbol is engraved on the top
• Glossy surface on top and sides of finished piece
• Unique Stone Edges with random cracks
• Stone Edge forms a rim on top of finished piece so items can’t roll off
• Deeper than regular molds (ample room for design and finishing the back)
• A fully filled mold will hold approx. 9 ounces of resin
Color: Translucent White
Mold Measurements: approx. 6.75” W x .85” H (On a finished piece, the recessed pocket measures approx. 4.10” W, and the Seed of Life Symbol is approx. 3.75″ W. On a fully poured piece the bottom base would measure approx. 6” W x up to .65” H.)
IMPORTANT NOTES:
• This mold is handmade to order. Please allow 5 business days for production.
• Because this is a handmade mold, it might have small imperfections.
• Click the tab above to read our Silicone Mold Care Guide.
** While Silicone Molds can be used with other casting materials, we have only used these with high quality Epoxy Resin.
Crystal Size Comparison Chart
Dust/Sand: Not measurable
Triple Zero (000): Under 1 mm
Double Zero (00): 1 to 3 mm
Zero (0): 3 to 5 mm
S1: 4 to 6 mm
L1: 5 to 7 mm
Size 2: 6 to 10 mm
Extra Small: 8 to 15 mm
Small: 12 to 20 mm
Medium: 18 to 25 mm
Large: 20 to 30 mm
XL: 30 to 50 mm
NOTE: Color, size, and shape will vary due to the fact that these are natural stones. Also, colors may vary, depending on your monitor settings, and may differ from the actual color of the item.
• Never use a torch or open flame with Silicone Molds.
• Never use anything sharp or abrasive, inside the mold.
• Always use high quality Epoxy Resin products and follow the mixing and pouring directions for that product.
• Keep your mold clean - Keep dust away by storing it in a plastic bag, and only use tape or warm water to clean it.
• The glossy surface of molds will fade away with repeated use. When this happens you will have to topcoat your finished piece, or purchase a new mold.
