Deep Double Pendant Mold
$11.00
5 in stock
Deep Double Pendant Mold
With this Mold you can create two Pendants with glossy faces and sides. Each Pendant opening measures approximately 1.18” W x 1.93” H, and offers up to .35″ of depth. There are also silicone posts in each mold opening, that will create pre-drilled holes, in the finished resin Pendants. This Mold can be used for top-up, or face down, resin pours.
This handmade Deep Double Pendant Mold can be used for Epoxy Resin casting.**
We’ve included a video above, for a more detailed view of the mold.
NOTE: The finished Crystal Pendants are shown as samples of what can be created using this mold, and they are not included.
We have uploaded a Video Tutorial, showing how to create top-up Resin Pendants, in this Deep Double Pendant Mold, on our YouTube Channel. Check out the link below to watch it.
Mold Features:
• Made from Platinum Cure Food Grade Silicone
• Glossy faces and sides
• Silicone Posts that create pre-drilled holes
• Each Pendant space is approximately .35″ deep
Color: Translucent White
Mold Measurements: approx. 3.15” W x 2.55” L x .55” H (Openings are .35″ D)
IMPORTANT NOTES:
• This mold is handmade to order. Please allow 5 business days for production.
• Because this is a handmade mold, it might have small imperfections.
• Click the tab above to read our Silicone Mold Care Guide.
** While Silicone Molds can be used with other casting materials, we have only used these with high quality Epoxy Resin.
Check out a YouTube Video Tutorial on how to pour Epoxy Resin in this Deep Double Pendant Mold:
Crystal Size Comparison Chart
Dust/Sand: Not measurable
Triple Zero (000): Under 1 mm
Double Zero (00): 1 to 3 mm
Zero (0): 3 to 5 mm
S1: 4 to 6 mm
L1: 5 to 7 mm
Size 2: 6 to 10 mm
Extra Small: 8 to 15 mm
Small: 12 to 20 mm
Medium: 18 to 25 mm
Large: 20 to 30 mm
XL: 30 to 50 mm
NOTE: Color, size, and shape will vary due to the fact that these are natural stones. Also, colors may vary, depending on your monitor settings, and may differ from the actual color of the item.
• Never use a torch or open flame with Silicone Molds.
• Never use anything sharp or abrasive, inside the mold.
• Always use high quality Epoxy Resin products and follow the mixing and pouring directions for that product.
• Keep your mold clean - Keep dust away by storing it in a plastic bag, and only use tape or warm water to clean it.
• The glossy surface of molds will fade away with repeated use. When this happens you will have to topcoat your finished piece, or purchase a new mold.
