Double Crystal Gem Edge Trinket Dish Mold
$28.00
8 in stock
Double Crystal Gem Edge Trinket Dish Mold
This Mold features multi-faceted, square-cut Crystal Gems (one row of Gems on the top and two rows of Gems on the sides) which will produce an elegant Trinket Dish.
This handmade Double Crystal Gem Edge Trinket Dish Mold can be used for Epoxy Resin casting.**
We’ve included a video above, for a more detailed view of the Mold (Video shows after images.)
NOTE: The finished Trinket Dishes are shown as samples of what can be created using this mold, and they are not included.
We have uploaded several Video Tutorials, showing how to use this Double Crystal Gem Edge Trinket Dish Mold on our YouTube Channel. Check out the links below to watch them.
Mold Features:
• Made from Platinum Cure Food Grade Silicone
• Glossy surface on top
• Multi-faceted, square-cut Crystal Gems are on top and sides of mold (one row of Gems on the top and two rows of Gems on the sides)
• This mold holds approximately 7.5 ounces of resin
Color: Translucent White
Mold Measurements: approx. 5.375” W x 1.05” H (A finished piece will measure approx. 4.75” W x .88” H)
IMPORTANT NOTES:
• This mold is handmade to order. Please allow 5 business days for production.
• Because this is a handmade mold, it might have small imperfections.
• Finished pieces from this mold might have sharp edges that will need filing.
• Click the tab above to read our Silicone Mold Care Guide.
** While Silicone Molds can be used with other casting materials, we have only used these with high quality Epoxy Resin.
Crystal Size Comparison Chart
Dust/Sand: Not measurable
Triple Zero (000): Under 1 mm
Double Zero (00): 1 to 3 mm
Zero (0): 3 to 5 mm
S1: 4 to 6 mm
L1: 5 to 7 mm
Size 2: 6 to 10 mm
Extra Small: 8 to 15 mm
Small: 12 to 20 mm
Medium: 18 to 25 mm
Large: 20 to 30 mm
XL: 30 to 50 mm
NOTE: Color, size, and shape will vary due to the fact that these are natural stones. Also, colors may vary, depending on your monitor settings, and may differ from the actual color of the item.
• Never use a torch or open flame with Silicone Molds.
• Never use anything sharp or abrasive, inside the mold.
• Always use high quality Epoxy Resin products and follow the mixing and pouring directions for that product.
• Keep your mold clean - Keep dust away by storing it in a plastic bag, and only use tape or warm water to clean it.
• The glossy surface of molds will fade away with repeated use. When this happens you will have to topcoat your finished piece, or purchase a new mold.
