Crown Coaster Silicone Mold
$18.00
19 in stock
Crown Coaster Silicone Mold
This listing is for one handmade Crown Coaster Silicone Mold, that you can use for Epoxy Resin casting.**
We’ve included a video above, for a more detailed view.
How to pour in this Mold:
Using your favorite Epoxy Resin, fill the open areas with your choice of Mica Powders, Resin Inks, or Glitter, and once that resin has cured/dried, you fill the balance of the mold with a color that will show as your background and sides. After that resin has cured, demold and top coat the Coaster, for a glossy finish. (The outside of the Coaster has a higher edge that makes top-coating easy.) If wanted/needed, the sides of the completed Coaster can be finished easily with Acrylic Paint or Acrylic Paint Pens.
NOTE: The finished resin piece is shown as a sample of what can be created using this mold, and it is not included.
We have uploaded a Video Tutorial, showing how to pour Epoxy Resin in this Mold, on our YouTube Channel. Check out the link below to watch.
Mold Features:
• Made from Platinum Cure Food Grade Silicone
• Smooth, matte sides
• This Mold uses approx. 6.20 oz of resin (approx. 1 ounce to fill the Crown area, approx. 2.50 ounces to fill the back, and approx. 2.70 ounces for the top coat.)
Color: Translucent White
Approximate Measurements: 4.68” W x .67” H (Finished pieces are approx. 4.39” W x .52” H)
IMPORTANT NOTES:
• This mold is handmade to order. Please allow 5 business days for production.
• Because this is a handmade mold, it might have small imperfections.
• Click the tab above to read our Silicone Mold Care Guide.
** While Silicone Molds can sometimes be used with other casting materials, we have only used these with high quality Epoxy Resin.
Watch our YouTube Video Tutorial on how to pour Epoxy Resin in this mold.
Crystal Size Comparison Chart
Dust/Sand: Not measurable
Triple Zero (000): Under 1 mm
Double Zero (00): 1 to 3 mm
Zero (0): 3 to 5 mm
S1: 4 to 6 mm
L1: 5 to 7 mm
Size 2: 6 to 10 mm
Extra Small: 8 to 15 mm
Small: 12 to 20 mm
Medium: 18 to 25 mm
Large: 20 to 30 mm
XL: 30 to 50 mm
NOTE: Color, size, and shape will vary due to the fact that these are natural stones. Also, colors may vary, depending on your monitor settings, and may differ from the actual color of the item.
• Never use a torch or open flame with Silicone Molds.
• Never use anything sharp or abrasive, inside the mold.
• Always use high quality Epoxy Resin products and follow the mixing and pouring directions for that product.
• Keep your mold clean - Keep dust away by storing it in a plastic bag, and only use tape or warm water to clean it.
• The glossy surface of molds will fade away with repeated use. When this happens you will have to topcoat your finished piece, or purchase a new mold.
