Geode Agate Coaster Silicone Mold A

Geode Agate Coaster Silicone Mold A

This listing is for one handmade Geode Agate Coaster Silicone Mold, with an irregular edge, that you can use for Epoxy Resin casting.** We also offer a sister/companion product which is Geode Agate Coaster Silicone Mold B, that has slightly different shapes inside.

We’ve included a video above, to show this Mold next to some finished pieces.

To better describe using this Geode Agate Coaster Mold, we use the terms “river” and “islands” (the river runs thru, and around, the island pieces.) This Mold has a total of 11 “islands.” On a finished Coaster, the top of the river area will be glossy, while the sides will be semi-glossy and irregular. The bottoms of the island areas will have a matte finish, on a finished Coaster, and they will show tool marks, so they can either be top coated with a bit of resin, for a glossy finish, or filled with Crystals, Glass, or Flowers. As long as you don’t fill the island areas too high, there won’t be any need to top coat this Coaster, as cups/glasses can rest comfortably, directly on the river area.

Here are two ways to work with this Mold:

#1 – You can fill the whole mold with your choice of Glitter, Crystals, Mica powders, or Resin Inks, and once the resin has cured/dried, and you have demolded, you can fill the island insets with Crystals, Glass, Flowers, etc., and secure them with resin or DecoArt Satin Varnish.

#2 – You can fill the river portion first with Glitter, Crystals, Mica powders, or Resin Inks, and once that river area has cured/dried, you can brush color shift Mica Pigments, on the island areas, then finish the pour with Black resin. Once you have demolded, you can simply top coat the island insets with a bit of resin, for a glossy finish.

The sides of the completed Coaster can be finished easily with Acrylic Paint or Acrylic Paint Pens.

NOTE: The finished Coasters are shown as samples of what can be created using this mold. The finished Coasters are not included.

We have uploaded several Video Tutorials, showing how to use this Mold, on our YouTube Channel. Links to those videos are also provided below.

Mold Features:

• Made from Platinum Cure Food Grade Silicone
• Glossy surface on top of river areas on finished piece
• Irregular sides
• This Mold uses approximately 3.17 ounces of resin in total. (It takes approx. 1 ounce of resin to fill just the river area.)

Color: Translucent White

Approximate Measurements: 4.675” L x 4.675” W x .75” H (Finished pieces are approx. 4.30” W x .50” H)

Finished products that were made from this mold are available for sale in our Geode Agate Coasters category.

IMPORTANT NOTES:

• This mold is handmade to order. Please allow 5 business days for production.

• Because this is a handmade mold, it might have small imperfections.

• Click the tab above to read our Silicone Mold Care Guide.

** While Silicone Molds can sometimes be used with other casting materials, we have only used these with high quality Epoxy Resin.

Watch some Video Tutorials below, on how to use this mold.